| General |
|
|
Frequency Bands
|
Sub-band 1: 138-174 MHz
Sub-band 2: 216-222 MHz
Sub-band 3: 360-400 MHz
Sub-band 4: 406-470 MHz
Sub-band 5: 450-512 MHz
|
| Operating Temperature Range |
-30° to +60°C |
| AC Input Voltage |
90-264 VAC, 47-63 Hz, 200 watts maximum |
| DC Input Voltage |
13.6 VDC nominal, 12 amps maximum |
| Auxiliary DC Output |
13.6 VDC nominal, internally fused at 2
amps |
| Internal Standby Battery Capacity |
7 amp hours @ 12 VDC |
| DV/IP Network Interface |
Ethernet, 10BaseT or 100BaseT |
| Duty Cycle |
Continuous |
| Cooling |
Multiple fans |
| Mounting |
19 inch standard EIA rack, 1 rack unit high |
| Weight |
25 lbs (11.4 kg) |
| Dimensions |
17.25" W x 17.125" D x 1.75"
H |
| |
|
| Transmitter |
|
| Electronic Bandwidth (no tuning) |
Full sub-band |
| Nominal Output Power (digitally adjustable) |
5-25 watts UHF;5- 30 watts VHF and 220 MHz |
| Output Impedance |
50 ohms |
| Output Connector |
Type N |
| Typical Channel Spacing |
12.5 kHz |
| Frequency Stability, standard |
0.50 ppm
|
| Tuning steps |
6.25 kHz; 5 kHz, 2.5 kHz |
| Synthesizer settling time |
<200 ns |
| Operational Mode |
TDMA/FDMA |
| Modulation Type |
4FSK |
| Modulation Protocol |
DV/IP trunking or conventional |
| Harmonics, Spurious |
-90 dBc |
| Occupied Bandwidth |
10.65 kHz |
| Licensed Bandwidth (12.5 kHz channel spacing) |
11.2 kHz |
| Maximum 4FSK data deviation |
± 3.3 kHz |
| Data Transmission Rate |
10,600 bps, 5,300 bps |
| Data Rate Stability |
<2 ppm |
| Morse Code ID FM MCW deviation |
± 1.6 kHz |
| Morse Code ID FM modulation frequency |
1300 Hz |
| Manual Alignments and Adjustments |
None |
| |
|
| Receiver |
|
| Type |
Dual Receiver Spacial Diversity |
| Electronic Tuning Bandwidth |
Full sub-band |
| Input Impedance |
50 ohms |
|
Antenna Inputs
|
RX 1A - Main receive input #1
RX 2A - Main receive input #2
RX 2B - Auxiliary receive input
|
| Isolation, RX 2B input to RX 2A and RX 1A |
-90 dB |
| Input Connectors |
BNC |
| Preselector Bandwidth (electronically tuned) |
4 MHz |
| Typical Channel Spacing |
12.5 kHz, 6.25 kHz |
| Frequency Stability |
0.50 ppm |
| Minimum tuning step |
6.25 kHz; ; 5 kHz, 2.5 kHz |
| Synthesizer settling time |
<200 ns |
| Digital Sensitivity, 0 Frame Error Rate |
-118 dBm (0.25 uV) |
| Bit Error Rate Floor |
0.01% |
| Signal Displacement Bandwidth |
>1 kHz |
| Front End IP3 |
+24 dBm |
| Front End Noise Figure |
0.5 dB |
| RX 2A to RX 2B ant/freq change
(<10 MHz) |
<200 ns |
| Technician Monitor Output Mode |
FM Demod to front panel loudspeaker |
| RSSI Linearity Range |
60 dB |
| Modulation compatibilty |
4FSK |
| Receive Data Rate |
10,600 bps |
| Demodulation protocol |
DV/IP conventional or trunking |
| Manual Alignments and Adjustments |
None |
| |
|
| Internal Router |
|
| Processor |
Embedded Pentium-compatible 32 bit |
| RAM |
Up to 256 MB |
| Program Memory |
Removeable CF Memory up to 512 MB |
| Operating System |
Linux supporting DV/IP Router |
| External Network Protocol |
TCP/IP |
| |
|
| Internal GPS Receiver |
|
| Channels |
12 |
| Frequency |
1.57542 GHz |
| Antenna input impedance |
50 ohms |
| Antenna type |
External active antenna required |
| Antenna voltage feed |
+3.3 volts DC |
| Nominal input sensitivity |
-120 dBm |
| Minimum signal for lock |
-140 dBm |
| |
|
| Rear Panel Connectors |
|
| TX Output |
Type N |
| RX Input 1A |
BNC |
| RX Input 2A |
BNC |
| RX Input 2B |
BNC |
| Ethernet |
RJ-45 8 pin |
| RS-232 #1 and #2 |
9 pin D connector |
| Telephone line (for interconnect option) |
RJ-11 6 pin |
| USB |
USB Type 1 |
| Accessory Connector (alarms,VGA, keyboard,
ext PA) |
AMP dual row 0.1 spaced header |
| DC Input |
2 pin Molex, locking |
| AC Input |
3 pin International AC connector |
| Auxiliary Chassis Ground |
Threaded 8-32 PEM nut; 8-32 machine screw
req'd |
| GPS Antenna |
SMA |
| Factory Automatic Test Connector |
AMP dual row 0.1 spaced header |
| |
|
| FCC Approvals |
OHN-B1000-2
OHN-B1000-4
|
| Industry Canada Approval |
3338B-B10004 |
